Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
M-13.1, r. 2 - Regulation respecting mineral substances other than petroleum, natural gas and brine
Section 90
Disposition versions
90. Reports, plans and maps referred to in this Chapter shall be established so that they may be clearly and precisely reproduced by photographic or digital processes.
To that end, they shall meet the following requirements:
(1) writing shall be printed or typed;
(2) plans and maps shall carry no photomosaic information;
(3) scales of plans and maps shall be graphic and digital;
(4) legends of plans and maps shall use symbols other than colours; colour may be used together with another symbol;
(5) plans and maps shall indicate:
(a) at the 4 corners, either the geographical (latitude, longitude) or rectangular UTM coordinates (Universal Transverse Mercator) and the zone, defined according to the North American Datum 1983 (NAD83), and its system of geodesic coordinates, in effect in accordance with the National Topographic System of Canada (NTS);
(b) the location of any geodesic station or other survey or topographic marker and of any control station that the work was tied in with;
(c) the perimeter of the land where the work was carried out, topographic landmarks as well as roads, rivers, lakes, township and seigniory boundaries and, where applicable, range and lot lines.
90. Reports, plans and maps referred to in this Chapter shall be established so that they may be clearly and precisely reproduced by photographic or digital processes.
To that end, they shall meet the following requirements:
(1) writing shall be printed or typed;
(2) plans and maps shall carry no photomosaic information;
(3) scales of plans and maps shall be graphic and digital;
(4) legends of plans and maps shall use symbols other than colours; colour may be used together with another symbol;
(5) plans and maps shall indicate:
(a) at the 4 corners, either the geographical (latitude, longitude) or rectangular UTM coordinates (Universal Transverse Mercator) and the zone, defined according to the North American Datum 1927 (NAD27), and its system of geodesic coordinates, or according to the North American Datum 1983 (NAD83), and its system of geodesic coordinates, in effect in accordance with the National Topographic System of Canada (NTS);
(b) the location of any geodesic station or other survey or topographic marker and of any control station that the work was tied in with;
(c) the perimeter of the land where the work was carried out, topographic landmarks as well as roads, rivers, lakes, township and seigniory boundaries and, where applicable, range and lot lines.
